13/12/2010
Got feedback from David. Done one part alteration.
Got all the print out of the Reports
Monday, December 13, 2010
Monday, December 6, 2010
Week-14-CRM
12/12/2010
I have finished all items of the User manual.
Done something on Documentation. And updated the testing result report respect to the supervisor advise. Added feasibility testing in system testing.
spent 8 hours.
11/12/2010
i Continued on User manual.
And i realized that i needed to change the format of the images.So i changed.
And in testing Result report, i used Testing interface part which is from design report.
spent 7 hours.
10/12/2010
I started to do User manual. Actually this has Case function as well.
So today i finished all functions which are involved with Case.
And Finished the reminder functions.Then started to do the Event page.
Event page is special page. Because it has only One page. And it use models.
So i used same technique to explain that how to use it.
spent 10 hours.
09/12/2010
Today i didn't do anything.We had a picnic.
I got a off day.
spent hours 0.
08/12/2010
Done Continue User Manual report.
User Manual is too long. Because of our CRM application has too many pages and functions.
So i decided to finished Client page at first.
So in there i need to capture long screen shot.
And i try to use a full screen shot capture software.
But it is gonna be new to me.
So i use Microsoft paint tool.
i realized that need good number system. Because of i need Sub numbers.
And there are some rotations with some pages. For that i just mentioned the page numbers to refer for repeat stuff.
Spent 10 hours.
07/12/2010
I continued to complete the Review procedure. asked from one of mate who done the documentation.
And i finished some of section of the documentation. Then we gone for the feedback of supervisor for the reports, we done so far.
I have known that need to both User manual and technical manual reports.
Spent 8 hours.
I have finished all items of the User manual.
Done something on Documentation. And updated the testing result report respect to the supervisor advise. Added feasibility testing in system testing.
spent 8 hours.
11/12/2010
i Continued on User manual.
And i realized that i needed to change the format of the images.So i changed.
And in testing Result report, i used Testing interface part which is from design report.
spent 7 hours.
Publish Post
10/12/2010
I started to do User manual. Actually this has Case function as well.
So today i finished all functions which are involved with Case.
And Finished the reminder functions.Then started to do the Event page.
Event page is special page. Because it has only One page. And it use models.
So i used same technique to explain that how to use it.
spent 10 hours.
09/12/2010
Today i didn't do anything.We had a picnic.
I got a off day.
spent hours 0.
08/12/2010
Done Continue User Manual report.
User Manual is too long. Because of our CRM application has too many pages and functions.
So i decided to finished Client page at first.
So in there i need to capture long screen shot.
And i try to use a full screen shot capture software.
But it is gonna be new to me.
So i use Microsoft paint tool.
i realized that need good number system. Because of i need Sub numbers.
And there are some rotations with some pages. For that i just mentioned the page numbers to refer for repeat stuff.
Spent 10 hours.
07/12/2010
I continued to complete the Review procedure. asked from one of mate who done the documentation.
And i finished some of section of the documentation. Then we gone for the feedback of supervisor for the reports, we done so far.
I have known that need to both User manual and technical manual reports.
Spent 8 hours.
Monday, November 29, 2010
Week-13-CRM
06/12/2010
I continued doing documentation report.
I struggled to do Document check list for review procedure.
I have did documentation Plan.
In there i used preparation and Submit of report. For preparation used total hours of all the procedures involve with each report.
And Today i spent 8 hours
05/11/2010
I tried to researched more for complete the TestingResult report. And for Error report i used the test case details.
I full filled some parts of the report.
I started the Documentation report. It is so difficult to do many things are coming as new.
Today i spent 8 hours
04/11/2010
Started to do the documentation. So actually i have less idea about the documentation. So i referred the report which have to complete by myself.
And my job is TestingResult report and documentation of reports.
So i researched from internet for making reports.
i tried to referred other reports elements as well.Because of testingresult report and testplan has close relationship.
And Today i spent 8 hours
03/11/2010
Today we done our marvelous presentation.Our each contribution vast enough.
Actually our presentation structure is
And i spent 7 hours
02/11/2010
Even final day we got some bugs.Tried to fix those which are relate each other like a web.
I tried to use activity structure for track each needs for each sub function.
Anyway we got rehearsal presentation in front of david.
So i got good feedback. he told me that i need more confidence. and ask why you have less confidence.because you done good work.
And Today i spent 10 hours
01/12/2010
I learned how Firefox SQL Injection for the Testing.
I gone through the documentation. because i have documentation and testing report.
And i tried to do many rehearsals of presentation.
I revealed that i less confidence and small voice. I believed that i need to make voice louder and do religious work before leave the home before the presentation.
And Today i spent 9 hours
30/11/2010
Today we got some trouble with internet connection for the server which we gonna use.
As other group we also postponed the presentation to Friday.
i done some error fixing.These are coming from auto post back.Because i tried to update the amount text box in description part by calculation which is in Timesheet portion. But it given error when we insert value in Amount,it auto post back and again need to insert. So i did set auto post back as false .
And i got some trouble from null value of GST and Discount values. We decided to use default value as 0.
And Today i spent 8 hours
29/11/2010
I have done testing on View Invoice Page.Because of i got some errors when it retrieving from database (Invoice detail table).
So tried to solve problem testing by using another grid view. It got same error.
At last i changed the version of program and data base.
I changed some store procedures.Some store procedures are new.
I done rehearsal for presentation with using script.
Actually i got extra topic which is Reminder page. So i need to go through that thoroughly.
Altogether i gone do Super Accountant activities.
And Today i spent 10 hours
I continued doing documentation report.
I struggled to do Document check list for review procedure.
I have did documentation Plan.
In there i used preparation and Submit of report. For preparation used total hours of all the procedures involve with each report.
And Today i spent 8 hours
05/11/2010
I tried to researched more for complete the TestingResult report. And for Error report i used the test case details.
I full filled some parts of the report.
I started the Documentation report. It is so difficult to do many things are coming as new.
Today i spent 8 hours
04/11/2010
Started to do the documentation. So actually i have less idea about the documentation. So i referred the report which have to complete by myself.
And my job is TestingResult report and documentation of reports.
So i researched from internet for making reports.
i tried to referred other reports elements as well.Because of testingresult report and testplan has close relationship.
And Today i spent 8 hours
03/11/2010
Today we done our marvelous presentation.Our each contribution vast enough.
Actually our presentation structure is
- First explain about Project team and client,
- technology tools we used,
- and Real system,
- Final part is that what we got from the project.Acknowledgment.
And i spent 7 hours
02/11/2010
Even final day we got some bugs.Tried to fix those which are relate each other like a web.
I tried to use activity structure for track each needs for each sub function.
Anyway we got rehearsal presentation in front of david.
So i got good feedback. he told me that i need more confidence. and ask why you have less confidence.because you done good work.
And Today i spent 10 hours
01/12/2010
I learned how Firefox SQL Injection for the Testing.
I gone through the documentation. because i have documentation and testing report.
And i tried to do many rehearsals of presentation.
I revealed that i less confidence and small voice. I believed that i need to make voice louder and do religious work before leave the home before the presentation.
And Today i spent 9 hours
30/11/2010
Today we got some trouble with internet connection for the server which we gonna use.
As other group we also postponed the presentation to Friday.
i done some error fixing.These are coming from auto post back.Because i tried to update the amount text box in description part by calculation which is in Timesheet portion. But it given error when we insert value in Amount,it auto post back and again need to insert. So i did set auto post back as false .
And i got some trouble from null value of GST and Discount values. We decided to use default value as 0.
And Today i spent 8 hours
29/11/2010
I have done testing on View Invoice Page.Because of i got some errors when it retrieving from database (Invoice detail table).
So tried to solve problem testing by using another grid view. It got same error.
At last i changed the version of program and data base.
I changed some store procedures.Some store procedures are new.
I done rehearsal for presentation with using script.
Actually i got extra topic which is Reminder page. So i need to go through that thoroughly.
Altogether i gone do Super Accountant activities.
And Today i spent 10 hours
Tuesday, November 23, 2010
Week-12-CRM
28/11/2010
27/10/2010
Today Done the Testing for Invoice System.
It done using Updating TimeSheet.Actually i used the Dat Table For keep the TimeSheetID and after confirm it goes to database and InvoiceFlag of timeSheet goes to true.
So it use session keep the Data table .
26/11/2010
Done Test case for each input items. Some time i used new validation.Actually it is expression validations.
For search client in Invoice page, with out input it shows every client.We think it is more convenient for the user.
Other thing is i succeeded the add the selected timesheetID to data table.But still doing coding for remove the TimeSheetID when uncheck.
I finished the testing for Top page of Invoice system,
25/11/2010
Today i done extra coding for TimeSheet updating.i used the data table keep the TimesheetID.
But when it unchecked it not remove from the data table.
Started to do the Test case document.But it not too easy.
Because of we need to finish all the stuff by next week.that is our target.
And i checked the SQL Injection.So there is a add-on tool in FireFox.So i tried it.It give result for each testing element.
This is the link.
https://addons.mozilla.org/en-US/firefox/addon/7597/
24/11/2010
I have done the all errors.Even come back from confirm page to create page for purpose of edit data it works.
Basically i use the class for transfer the data to confirm page and when come back to create page it use the session and same time i need to remove the sessions which are use in create invoice page.
I started to work on updating TimeSheet when it using.So still i 'm doing these coding.
And i doing coding for auto complete feature for the Search text box.
23/11/2010
I done the Testing part for the Invoice page.there were some conflicts.
Because of i use Class parameters and session.
Some time i need separate and sometime both.
So at first done normal floor.That's mean with out Edit button.And Even for that i got some trouble from coding because i changed the structure.
I realize some sessions going to assign to the control and just after that sessions going to null value...
22/11/2010
Used This link for count the sum of specific columns;
http://programming.top54u.com/post/ASP-Net-DataTable-Compute-Column-Sum-using-C-sharp.aspx
I used the coding for compare the date as below;
if (DateTime.Now < Convert.ToDateTime(txtIssueDate.Text))
And i realized i need two labels for same values.One for calculating purpose and other is display purpose.
I tried to finished main functions of invoice..But still remaining time sheet update.
- Have done Invoice system Test case as well as payment system Test case.In Payment function also i used the Expression validator. And i used the calender to use for select the date for payment date.
- In Payment form strongly text payment amount and Bank reference No text box.Because it allow to use Slash mark and dot which are symbols.
- In Payment Top page i found the table which show incomplete Invoice details.And it has Paid date. But when invoice create it has not any paid date in the Invoice table.So List does not show which has null value. So i had overcome by using grid view column property called NulDisplayText as "N/A".
- After that i got almost finished Invoice system and payment tracking system
27/10/2010
Today Done the Testing for Invoice System.
It done using Updating TimeSheet.Actually i used the Dat Table For keep the TimeSheetID and after confirm it goes to database and InvoiceFlag of timeSheet goes to true.
So it use session keep the Data table .
26/11/2010
Done Test case for each input items. Some time i used new validation.Actually it is expression validations.
For search client in Invoice page, with out input it shows every client.We think it is more convenient for the user.
Other thing is i succeeded the add the selected timesheetID to data table.But still doing coding for remove the TimeSheetID when uncheck.
I finished the testing for Top page of Invoice system,
25/11/2010
Today i done extra coding for TimeSheet updating.i used the data table keep the TimesheetID.
But when it unchecked it not remove from the data table.
Started to do the Test case document.But it not too easy.
Because of we need to finish all the stuff by next week.that is our target.
And i checked the SQL Injection.So there is a add-on tool in FireFox.So i tried it.It give result for each testing element.
This is the link.
https://addons.mozilla.org/en-
24/11/2010
I have done the all errors.Even come back from confirm page to create page for purpose of edit data it works.
Basically i use the class for transfer the data to confirm page and when come back to create page it use the session and same time i need to remove the sessions which are use in create invoice page.
I started to work on updating TimeSheet when it using.So still i 'm doing these coding.
And i doing coding for auto complete feature for the Search text box.
23/11/2010
I done the Testing part for the Invoice page.there were some conflicts.
Because of i use Class parameters and session.
Some time i need separate and sometime both.
So at first done normal floor.That's mean with out Edit button.And Even for that i got some trouble from coding because i changed the structure.
I realize some sessions going to assign to the control and just after that sessions going to null value...
22/11/2010
Used This link for count the sum of specific columns;
http://programming.top54u.com/post/ASP-Net-DataTable-Compute-Column-Sum-using-C-sharp.aspx
I used the coding for compare the date as below;
if (DateTime.Now < Convert.ToDateTime(txtIssueDate.Text))
And i realized i need two labels for same values.One for calculating purpose and other is display purpose.
I tried to finished main functions of invoice..But still remaining time sheet update.
Monday, November 15, 2010
Week-11-CRM
22/11/2010
Used This link for count the sum of specific columns;
http://programming.top54u.com/post/ASP-Net-DataTable-Compute-Column-Sum-using-C-sharp.aspx
21/11/2010
Today i succeeded the remove function for the Data table.
So this is the coding,
DataTable Table = (DataTable)Session["Table"];
DataRow row = Table.Rows[0];
Table.Rows.Remove(row);
Table.AcceptChanges();
Then i check functionality of each elements further.
After that i realized that even after remove the all rows of the description table, SubAmount has previous value. So still work on that.
And i got the coding to change the Amount value into currency value when i use the label for display.
And I tried on after edit button keep all the records as it is.Only check box doesn't get the value.
I think it is in panel and those have complex coding.So still doing on that.
20/11/2010
Today also done testing part of the Payment page and Invoice page.
In Testing got many faults as usual.
And i have error in address choosing table. Because i need to pop up the each address each choosing.
So i used the separate USP. And it has validation when user create invoice form.
And i changed the elements of confirm page.
Besides that i used the Ajax tools for choosing dates and type correct data format.
And there are many panels use for controls to visibility of the elements.
Then i used the function check the insert Invoice No is available or not.That is doing by Availability button.
19/10/2010
Done unit testing for each sub functions of Payment and Invoice.
18/11/2010
I started the rearranged the Invoice page as well as Payment page.
So in Invoice Page i have Invoice form for print purpose and PDF format. So i use the one main table to group all the elements. Otherwise all are scatted in everywhere.
I got some advise from the Tokio for beautify the each page.That's mean i have a good structure.
So i need to use main topics in top page.Then other are going as links.
17/10/2010
Today i done final coding for the payment and invoice functions.So i realized now i achieved the real client requirements.
But i got some difficulties in Sql statements.Because i need the data from two tables. i resolved using Right join statement.
Actually i focused on page designed as well.
And i doubt about the panel. I used the panel for GST flag, Discount.After visible changed to false in property.It is not visible permanently in Design page.
Still didn't get the result.
And also we can't use one Update panel for whole the elements
16/11/2010
Today while doing design on the Invoice page.suddenly changed the size of date sources and script manager box.I tried my best. even my mate Reiko couldn't find the solution.
So i again checkout from the subversion.Done the coding again using previous version.
I used the class for Create Invoice page and confirm invoice page.It is easy to handle the coding well.
When i executed it getting error from the coding which are Invoice detail data table.
I realized the reason of the error.Because of the method for create the data table has been removed. So i fixed it.
15/11/2010
Used This link for count the sum of specific columns;
http://programming.top54u.com/post/ASP-Net-DataTable-Compute-Column-Sum-using-C-sharp.aspx
21/11/2010
Today i succeeded the remove function for the Data table.
So this is the coding,
DataTable Table = (DataTable)Session["Table"];
DataRow row = Table.Rows[0];
Table.Rows.Remove(row);
Table.AcceptChanges();
Then i check functionality of each elements further.
After that i realized that even after remove the all rows of the description table, SubAmount has previous value. So still work on that.
And i got the coding to change the Amount value into currency value when i use the label for display.
And I tried on after edit button keep all the records as it is.Only check box doesn't get the value.
I think it is in panel and those have complex coding.So still doing on that.
20/11/2010
Today also done testing part of the Payment page and Invoice page.
In Testing got many faults as usual.
And i have error in address choosing table. Because i need to pop up the each address each choosing.
So i used the separate USP. And it has validation when user create invoice form.
And i changed the elements of confirm page.
Besides that i used the Ajax tools for choosing dates and type correct data format.
And there are many panels use for controls to visibility of the elements.
Then i used the function check the insert Invoice No is available or not.That is doing by Availability button.
19/10/2010
Done unit testing for each sub functions of Payment and Invoice.
- At first i got some trouble of EDIT button.because of when user needs to edit the Invoice form,he needs same previous values to edit.But i did not get the all values like details description and sub amount.
- And Issuedate.Issuedate i use as default value current date. So even user change the current value to desired date, in the Invoice confirm form get the current date value.
- Last element of the invoice is confirm button. So it has long store procedure and it giving some error in coding for execute .
18/11/2010
I started the rearranged the Invoice page as well as Payment page.
So in Invoice Page i have Invoice form for print purpose and PDF format. So i use the one main table to group all the elements. Otherwise all are scatted in everywhere.
I got some advise from the Tokio for beautify the each page.That's mean i have a good structure.
So i need to use main topics in top page.Then other are going as links.
17/10/2010
Today i done final coding for the payment and invoice functions.So i realized now i achieved the real client requirements.
But i got some difficulties in Sql statements.Because i need the data from two tables. i resolved using Right join statement.
Actually i focused on page designed as well.
And i doubt about the panel. I used the panel for GST flag, Discount.After visible changed to false in property.It is not visible permanently in Design page.
Still didn't get the result.
And also we can't use one Update panel for whole the elements
16/11/2010
Today while doing design on the Invoice page.suddenly changed the size of date sources and script manager box.I tried my best. even my mate Reiko couldn't find the solution.
So i again checkout from the subversion.Done the coding again using previous version.
I used the class for Create Invoice page and confirm invoice page.It is easy to handle the coding well.
When i executed it getting error from the coding which are Invoice detail data table.
I realized the reason of the error.Because of the method for create the data table has been removed. So i fixed it.
15/11/2010
- I done most of the Payment function.And i got one problem which is data binding.But in the page i hadn't any data binding. So then we found that previous setting one drop down list got past setting.So i chosen the data source.
- In the Invoice pages i changed the front page use the search function for client. And i rearranged the elements of the Invoice template.
- We done client meeting in client desk. Basically we discussed my work. I got got response.Actually he need to input payment details for selected invoices.
Tuesday, November 9, 2010
Weeh-10-CRM
14/11/2010
I got my mates from the Library. And Tokio suggested me to changed the idea of payment function.
So it gonna be only a form for the payment details and it show the updated payment balance basically.
But there are coding for the select the old invoice to check as complete.
So in the evening i done up to crucial part.
Still i have some trouble with the design of the Payment page.
And redesigned the invoice form with invoice format which is finalized by the group members
13/11/2010
I done the Payment page with using the grid view to do the manual selection for each payment.
And final output comes on labels which are relate to Payment Balance,Invoice payment status like whether invoice is paid completely or partially.
I designed the Invoice form for the Invoice page. And i expect to use the different page to show the PDF page.So it would be easy.
12/11/2010
I changed my mind that working with updating grid view which has data bind.
Because of it is like impossible rebind the data.
So i decided to do the updating Pay invoice grid view details with using coding.
I done the coding almost,which involve with updating.
I focus on the payment and respect to that update the invoice table details and update Client payment balance.
11/11/2010
Today i started to design the pages with using my draft.There were many alterations.Because this should be matched with the client requirements. Some times i got some idea from the Tokio.
So now i implementing Invoice list,Create Invoice and Confirm Invoice Pages.
In Confirm Invoice Page i have the Invoice form which has Invoice details and Tax payer details.
Any way i need some extra information from the client for verify some items of the Invoice functions.
So i expect to go for the client meeting tomorrow.
10/11/2010
Done the Payment function with remaining Grid View.Still need to complete last step.
But i need focus on other stuff.So i started the design of Invoice function.
Basically there are three pages.That's mean i need much coding than the payment function.
So at first i transferred the coding and design what i did in previous version to new version.
So i draft rest of other items.
09/11/2010
Today i started to worked on the new version of the system.We are using subversion software to deal with all our system versions.
And i realized i can use the data table for the payment page.when i need to transfer the selected items to another table.
So using the data table i bind the details with new grid view.But i need to update the this details which are bind with the grid view.
So currently i am researching for this matter.
08/11/2010
I still worked on the payment page.Because of that much it is difficult to understand the process of the real payment.
And i changed my first idea. And got a advice from my mate.
Besides that i knew that i need an associate table between invoice table and payment table.
Because of one payment may has many invoice amount and also one invoice has many payment.
So i tried to do the payment page with using two Grid view tables.when user select the invoice it goes to payment table. Then there is the confirm feature.
I got my mates from the Library. And Tokio suggested me to changed the idea of payment function.
So it gonna be only a form for the payment details and it show the updated payment balance basically.
But there are coding for the select the old invoice to check as complete.
So in the evening i done up to crucial part.
Still i have some trouble with the design of the Payment page.
And redesigned the invoice form with invoice format which is finalized by the group members
13/11/2010
I done the Payment page with using the grid view to do the manual selection for each payment.
And final output comes on labels which are relate to Payment Balance,Invoice payment status like whether invoice is paid completely or partially.
I designed the Invoice form for the Invoice page. And i expect to use the different page to show the PDF page.So it would be easy.
12/11/2010
I changed my mind that working with updating grid view which has data bind.
Because of it is like impossible rebind the data.
So i decided to do the updating Pay invoice grid view details with using coding.
I done the coding almost,which involve with updating.
I focus on the payment and respect to that update the invoice table details and update Client payment balance.
11/11/2010
Today i started to design the pages with using my draft.There were many alterations.Because this should be matched with the client requirements. Some times i got some idea from the Tokio.
So now i implementing Invoice list,Create Invoice and Confirm Invoice Pages.
In Confirm Invoice Page i have the Invoice form which has Invoice details and Tax payer details.
Any way i need some extra information from the client for verify some items of the Invoice functions.
So i expect to go for the client meeting tomorrow.
10/11/2010
Done the Payment function with remaining Grid View.Still need to complete last step.
But i need focus on other stuff.So i started the design of Invoice function.
Basically there are three pages.That's mean i need much coding than the payment function.
So at first i transferred the coding and design what i did in previous version to new version.
So i draft rest of other items.
09/11/2010
Today i started to worked on the new version of the system.We are using subversion software to deal with all our system versions.
And i realized i can use the data table for the payment page.when i need to transfer the selected items to another table.
So using the data table i bind the details with new grid view.But i need to update the this details which are bind with the grid view.
So currently i am researching for this matter.
08/11/2010
I still worked on the payment page.Because of that much it is difficult to understand the process of the real payment.
And i changed my first idea. And got a advice from my mate.
Besides that i knew that i need an associate table between invoice table and payment table.
Because of one payment may has many invoice amount and also one invoice has many payment.
So i tried to do the payment page with using two Grid view tables.when user select the invoice it goes to payment table. Then there is the confirm feature.
Monday, November 1, 2010
Week-09-CRM
06/11/2010
Today i done the payment page.Still i have no clear idea about their payment.
So i thought some setups. And So my logic is first search by client name,client IRD or Invoice no.
Then show the invoice detail which is not completed.
As an option show the all payment which are relate to particular client.
s do this i done dummy data and table structure for the payment.Done the coding for the isert payment details.
05/11/2010
We discussed about the ER Diagram.
So we decided to continue the work for finishing function.And i am creating payment page.
So i try to use the gridview for show the payment records for each client.And use the lightbox
for the insert form.
For the report function i go to use the same PDF function with more improvements.
And invoice page i am doing to use format for the create invoice.
04/11/2010
At very first i done the Log out function with my mate after more effort.Because of i have referred more coding to handle the cache and session, but never succeeded.This time we got key coding.
And i updated the Invoice page with using some details.
In the evening, we got the client meeting.There we showed our each work.John mention some suggestions which are different what we thought. Because of last time we got the client meeting with the Sherli. And she have got different mind than him.Anyway he appreciated us about the system.
So after meeting i finished the client meeting for tomorrow discussion among the project team.
03/11/2010
Today morning i started the coding for the Pdf function and print function for the invoice.
So completed the invoice page for prototype.
And i focused on the login function.got some advise from the mate and reviewed what i done so far in the login function.Then i realized that every page need to clear the Cache. And every page except login page,need to check whether has the session or not. If has not redirect to login page.
But thing is i need to refresh for every time.
So i need further solution.
02/11/2010
Finally succeeded the grid view of client invoice list, which use drop down list to choose the year and month.And use the button for the redirect to the create invoice for the particular user's..
according to the client, TimeSheet table also get the vale.Create invoice only get the value of the user's strongly
In create invoice page,we need the contact person or not...
In the create page i use the session for clientID show client name
And in the form we need to use the predefined the rate for the client .Still not confirm.S needed to confirm from the client side
01/11/2010
In the morning i tried to solve the checkbox issue and finally succeeded.So i can use the check box using select all function.And same time total hours going to change respect to the checked checkbox.
And i done coding for the client invoice list with using drop down list.that's mean respect year in drop down list client list gonna be changed.but when i use store procedure for that in the client list gridview, it can not show in the page.I need to solve it.
And we got the group meeting in the morning.we discussed about the Client contact in the
ER Diagram.In our project Mt.Roskill accountant sort out every thing by the client name.And in the business they never use many contact channel.So depend on the business denormalization is suited.
And supervisor asked us that better thing is not do the presentation.So we are not going to do.
finally i done the meeting minute for the group meeting.
Today i done the payment page.Still i have no clear idea about their payment.
So i thought some setups. And So my logic is first search by client name,client IRD or Invoice no.
Then show the invoice detail which is not completed.
As an option show the all payment which are relate to particular client.
s do this i done dummy data and table structure for the payment.Done the coding for the isert payment details.
05/11/2010
We discussed about the ER Diagram.
So we decided to continue the work for finishing function.And i am creating payment page.
So i try to use the gridview for show the payment records for each client.And use the lightbox
for the insert form.
For the report function i go to use the same PDF function with more improvements.
And invoice page i am doing to use format for the create invoice.
04/11/2010
At very first i done the Log out function with my mate after more effort.Because of i have referred more coding to handle the cache and session, but never succeeded.This time we got key coding.
And i updated the Invoice page with using some details.
In the evening, we got the client meeting.There we showed our each work.John mention some suggestions which are different what we thought. Because of last time we got the client meeting with the Sherli. And she have got different mind than him.Anyway he appreciated us about the system.
So after meeting i finished the client meeting for tomorrow discussion among the project team.
03/11/2010
Today morning i started the coding for the Pdf function and print function for the invoice.
So completed the invoice page for prototype.
And i focused on the login function.got some advise from the mate and reviewed what i done so far in the login function.Then i realized that every page need to clear the Cache. And every page except login page,need to check whether has the session or not. If has not redirect to login page.
But thing is i need to refresh for every time.
So i need further solution.
02/11/2010
Finally succeeded the grid view of client invoice list, which use drop down list to choose the year and month.And use the button for the redirect to the create invoice for the particular user's..
according to the client, TimeSheet table also get the vale.Create invoice only get the value of the user's strongly
In create invoice page,we need the contact person or not...
In the create page i use the session for clientID show client name
And in the form we need to use the predefined the rate for the client .Still not confirm.S needed to confirm from the client side
01/11/2010
In the morning i tried to solve the checkbox issue and finally succeeded.So i can use the check box using select all function.And same time total hours going to change respect to the checked checkbox.
And i done coding for the client invoice list with using drop down list.that's mean respect year in drop down list client list gonna be changed.but when i use store procedure for that in the client list gridview, it can not show in the page.I need to solve it.
And we got the group meeting in the morning.we discussed about the Client contact in the
ER Diagram.In our project Mt.Roskill accountant sort out every thing by the client name.And in the business they never use many contact channel.So depend on the business denormalization is suited.
And supervisor asked us that better thing is not do the presentation.So we are not going to do.
finally i done the meeting minute for the group meeting.
Monday, October 25, 2010
Week-08-CRM
31/10/2010
I done the coding for use the check box in the TimeSheet.
I have got the select all function also.
Whatever you select it show the total hours of selected date.but when use the select all check box it shows nothing.That is the problem i got recently.
So I try to solve that.And i think about the structure have to use in the invoice page.
30/10/2010
I done the TimeSheet with using check box.But didn't finalized because of still i need to think about the function requirements.Any way i will try to do that.Because of we need to show our suggestions about the TimeSheet.TimeSheet is very much useful if are there many employees.
So i have create invoice page which has create invoice form and TimeSheet(as a reference for the create invoice and able to tick).
One thing is i used new master page.because of i need equal width of content holders.
29/10/2010
I again started to do the Invoice page.And i created the table for TimeSheet for show the date and end time, start time and total hours of particular event.
I need some SQL statements (SP) for get the total of total hours and current duration of all the events.So i need to get first row 'date' column value and last row 'date' column value.
i used select option in twice in same store procedure.But it didn't given the two values.
So i used output parameters.that also didn't work.
So i needed to research that one.
In the evening we got our group meeting with the supervisor.And we have got valuable advice about the IT life and how to the Project strongly.
28/10/2010
Today i done the my invoice page using light box. But could not work at first. So again i checked it and realized i should not change the css properties of the light box.
And used two drop down lists in the create invoice form. And i tried to use first drop down list selection effect to the next drop down list.It has some asp.net properties.So my mate has helped me to archive it.
And i tried to use the PDF function in the invoice page. But it doesn't work.
27/10/2010
I done the logout function. But still have some issues with the function.
And i started to work on Invoice page.So i done Two pages using grid view and light box.
But i need to use the check box for the grid view.So i need some research for that.
26/10/2010
In the morning i prepared for the presentation.So i got first part of the presentation.
Which is about the page of client for the accountant.i need to explain client detail management and case with the case history.
We done the presentation secondly.So i felt that i didn't get good voice.So i need to increase the voice next time presentation.
And after presentation i got new task which is a work on Invoice.Rest parts are implement the back button,PDF function for crucial functions which need that.
25/10/2010
I worked on Store Procedures for the prototype system.
And i did understand that with out html pages.
So i refereed the mates work.And i created the Store procedures fro class as well.
Then i tried to attached the PDF function in the Client home page. But i realized it's not show the table border.So i need to solve it.
Other thing is login function.In login function,when go to log out,using back button can't go back.
but even after login back button doesn't not work.So i have tried on that.
I done the coding for use the check box in the TimeSheet.
I have got the select all function also.
Whatever you select it show the total hours of selected date.but when use the select all check box it shows nothing.That is the problem i got recently.
So I try to solve that.And i think about the structure have to use in the invoice page.
30/10/2010
I done the TimeSheet with using check box.But didn't finalized because of still i need to think about the function requirements.Any way i will try to do that.Because of we need to show our suggestions about the TimeSheet.TimeSheet is very much useful if are there many employees.
So i have create invoice page which has create invoice form and TimeSheet(as a reference for the create invoice and able to tick).
One thing is i used new master page.because of i need equal width of content holders.
29/10/2010
I again started to do the Invoice page.And i created the table for TimeSheet for show the date and end time, start time and total hours of particular event.
I need some SQL statements (SP) for get the total of total hours and current duration of all the events.So i need to get first row 'date' column value and last row 'date' column value.
i used select option in twice in same store procedure.But it didn't given the two values.
So i used output parameters.that also didn't work.
So i needed to research that one.
In the evening we got our group meeting with the supervisor.And we have got valuable advice about the IT life and how to the Project strongly.
28/10/2010
Today i done the my invoice page using light box. But could not work at first. So again i checked it and realized i should not change the css properties of the light box.
And used two drop down lists in the create invoice form. And i tried to use first drop down list selection effect to the next drop down list.It has some asp.net properties.So my mate has helped me to archive it.
And i tried to use the PDF function in the invoice page. But it doesn't work.
27/10/2010
I done the logout function. But still have some issues with the function.
And i started to work on Invoice page.So i done Two pages using grid view and light box.
But i need to use the check box for the grid view.So i need some research for that.
26/10/2010
In the morning i prepared for the presentation.So i got first part of the presentation.
Which is about the page of client for the accountant.i need to explain client detail management and case with the case history.
We done the presentation secondly.So i felt that i didn't get good voice.So i need to increase the voice next time presentation.
And after presentation i got new task which is a work on Invoice.Rest parts are implement the back button,PDF function for crucial functions which need that.
25/10/2010
I worked on Store Procedures for the prototype system.
And i did understand that with out html pages.
So i refereed the mates work.And i created the Store procedures fro class as well.
Then i tried to attached the PDF function in the Client home page. But i realized it's not show the table border.So i need to solve it.
Other thing is login function.In login function,when go to log out,using back button can't go back.
but even after login back button doesn't not work.So i have tried on that.
Monday, October 18, 2010
Week-07-CRM
24/10/2010
Today i started to continue Store Procedures for Client page functions.
i refereed the client page view for create the Store Procedures.
I done the join store procedure for Case details and Case history.And my mate has helped me.
i refereed the dummy data for checking purpose.
Tried to understand the Jquerry which are used in the application.
23/10/2010
I done the Store procedure for the login function for both users client and accountant.
and Forgot Password function for both users.
I used dummy data for the table.because i need the dummy data for build my store Procedures.
Then i tried to continued to do the Store procedures for client side functions like client list,client detail and case detail.
22/10/2010
Today in the morning again i started to fix the asp.net problem.
finally i asked my mate for help.Then she also reinstalled the software but couldn't solve it.Then so he checked the host system file.It has changed the localhost address to 0.0.0.0. So we changed it to 127.0.0.1 , then problem is solved.
After that i tried to do the PDF function for the panel.at first i used the AJAX update panel.It didn't work.because of the AJAX is a client side control.So i used the panel control which is in standard tool.So i succeeded.
But i need some extra coding for giving more usability.
At 6.00 pm we got our group meeting with the supervisor.We finished that at 6.30 pm .we realized what are things we need to achieve.
21/10/2010
Today i tried on the PDF converter.So i spend whole the morning for the function.
finally i succeeded the PDF function.
There i use itextsharp latest version x.504.but asp.net support only past versions.
So i used x.401 version itextsharp.
After that i try to use this function with panel.but asp.net debug suddenly broken.So i have to fix this problem tonight doing re-installation.
20/10/2010
Today i worked on searching the PDF converter function. It has to use a object for the convert the html or report to PDF format.
So there is itextsharp application.So i try on that for making the PDF function.
and search a javascript function which can help for the PDF asction.
And i changed my operting system to windows 7 professional.because of some errors occured on previous operating system.
19/10/2010
First i finished the meeting minutes for the yesterday group meeting.
And i worked on the coding for the print report function.actually there is a print function in the report viewer control.but it can use only in IE browser.
And i try to search coding for separate print function.but very difficult to find that kind of examples.
in the afternoon we got our presentation.we doe as our supervisor said.And got many comments from supervisors.Their suggestions mostly came from invoice,reminder,case and timesheet.So i kept the records of the comments.After finished the presentation,we reviewed the ER Diagram with using my records.
Finally i tried to use JavaScript.But that function from the JavaScript is just a print function for print the page view.But we need to print specific report.
18/10/2010
Today we reviewed about meeting agenda before the client meeting.
And we have met client at noon.we asked questions which are mostly related to the invoice, Function list and UserID.
After that meeting came back and done the meeting minutes.Again discussed about the presentation flow.
And we participated to the group meeting with supervisor.So he asked us to just explain the ER Diagram same time distribute the ER Diagram and ask about comments from the audience.If any question relate to the UML diagrams then only go to explain the UML diagram.otherwise presentation make audience be fed up.
So we finalized to do the presentation with only ER Diagram and confirm the ER Diagram first.
Today i started to continue Store Procedures for Client page functions.
i refereed the client page view for create the Store Procedures.
I done the join store procedure for Case details and Case history.And my mate has helped me.
i refereed the dummy data for checking purpose.
Tried to understand the Jquerry which are used in the application.
23/10/2010
I done the Store procedure for the login function for both users client and accountant.
and Forgot Password function for both users.
I used dummy data for the table.because i need the dummy data for build my store Procedures.
Then i tried to continued to do the Store procedures for client side functions like client list,client detail and case detail.
22/10/2010
Today in the morning again i started to fix the asp.net problem.
finally i asked my mate for help.Then she also reinstalled the software but couldn't solve it.Then so he checked the host system file.It has changed the localhost address to 0.0.0.0. So we changed it to 127.0.0.1 , then problem is solved.
After that i tried to do the PDF function for the panel.at first i used the AJAX update panel.It didn't work.because of the AJAX is a client side control.So i used the panel control which is in standard tool.So i succeeded.
But i need some extra coding for giving more usability.
At 6.00 pm we got our group meeting with the supervisor.We finished that at 6.30 pm .we realized what are things we need to achieve.
21/10/2010
Today i tried on the PDF converter.So i spend whole the morning for the function.
finally i succeeded the PDF function.
There i use itextsharp latest version x.504.but asp.net support only past versions.
So i used x.401 version itextsharp.
After that i try to use this function with panel.but asp.net debug suddenly broken.So i have to fix this problem tonight doing re-installation.
20/10/2010
Today i worked on searching the PDF converter function. It has to use a object for the convert the html or report to PDF format.
So there is itextsharp application.So i try on that for making the PDF function.
and search a javascript function which can help for the PDF asction.
And i changed my operting system to windows 7 professional.because of some errors occured on previous operating system.
19/10/2010
First i finished the meeting minutes for the yesterday group meeting.
And i worked on the coding for the print report function.actually there is a print function in the report viewer control.but it can use only in IE browser.
And i try to search coding for separate print function.but very difficult to find that kind of examples.
in the afternoon we got our presentation.we doe as our supervisor said.And got many comments from supervisors.Their suggestions mostly came from invoice,reminder,case and timesheet.So i kept the records of the comments.After finished the presentation,we reviewed the ER Diagram with using my records.
Finally i tried to use JavaScript.But that function from the JavaScript is just a print function for print the page view.But we need to print specific report.
18/10/2010
Today we reviewed about meeting agenda before the client meeting.
And we have met client at noon.we asked questions which are mostly related to the invoice, Function list and UserID.
After that meeting came back and done the meeting minutes.Again discussed about the presentation flow.
And we participated to the group meeting with supervisor.So he asked us to just explain the ER Diagram same time distribute the ER Diagram and ask about comments from the audience.If any question relate to the UML diagrams then only go to explain the UML diagram.otherwise presentation make audience be fed up.
So we finalized to do the presentation with only ER Diagram and confirm the ER Diagram first.
Friday, October 15, 2010
Week-06-CRM
17/10/2010
Today we discussed about the presentation.i got doubt about the sequence diagram for the create new case history. Because of after display case list we need to choose the the case.
Again updated the ER Diagram by adding the active flag for each table.because of we have deactivate option for each function.Put send email flag in the reminder table
Then i realized still we have no idea about the report table.so i removed it from the Class diagram.and put client type in to different table but not in generalization.
Finally we decided that i do the presentation, first at the sequence diagram for the create new case history. Then explain about the class diagram.So i done the script for my role.
16/10/2010
I have worked on the print report function.and help of my mate, i solved the problem with footer and the report window.We used same height for each item.
We have done the basic template for invoice.There is function called "accountant can refer time sheet to create invoice". I thought that idea is good,but we need another way to explain the function.So it will be changed by Tokio.
we discussed that issue the invoice depend on the client contract.In the invoice page template we use drop down list for the month.So we can use every invoice of the client choosing the month.
I mentioned that View time card function for not only individuals but also system admin.So here we need a assumption that system admin is the employer and he is doing calculating the salaries.
In the presentation i have chosen class diagram and sequence diagram.Because of i need to familiar with these UML diagrams.
I got rough idea about the diagrams.But i think it is not enough for the presentation.So i must prepare the slides and script well.
15/10/2010
Today i started to reveal the report function.and i got a tool called firebug from my mate.i think i can use it for that.And we discussed about the sequence diagram.
And i didn't get the idea about the interface.after discussion i knew that interface means web browser and web server.
At 5.00p.m we got group meeting with supervisor.And we got good feedback from him.And he asked us to do advanced approach.specially asked me about coding progress.So told him i already done login function and now i focus on print report.
He mentioned about next face called "testing" too.ask us to ready for that like preparing test case template.
After finished the minute minute.I done the document for that and asked my mate to checked that.then i have kept in share folder.
And i installed CS5 for web design purpose.
14/10/2010
Today i followed many suggestions which are from the internet research.So i used name spaces like System.Drawing Microsoft.Reporting.winforms.
But still not solved.So i think it is the problem with CSS file.
Anyway i continued to do on print report function.So i need the extra coding for activate print function in the report.So i have used external c# coding there.So it is under construction.
Discussed about the presentation and done coding for the print report function.
13/10/2010
Worked on coding for the login and Researched the print report function.
Then i revealed that also embedded in the ASP.NET and it has report function, export as a excel, PDF and print features.
But i got one issue with the function.Because of when i use the report control that report going through the footer.that's mean report is going behind the footer.
So sill i try to mitigate the problem.
Then done the discussion of use case diagram for actors.
And updated the ER Diagram.
12/10/2010
Specially i researched login function and i found that ASP.NET has embedded login function which has authentication.But it didn't work.Then i refereed the ASP.NET video tutorial.So i changed the authentication from windows to form in web config.
And the function it use cookies.So i realized we don't want the remember me function.anyway i implemented that also.
i drafted other tasks for the search and print report.
Today we discussed about the presentation.i got doubt about the sequence diagram for the create new case history. Because of after display case list we need to choose the the case.
Again updated the ER Diagram by adding the active flag for each table.because of we have deactivate option for each function.Put send email flag in the reminder table
Then i realized still we have no idea about the report table.so i removed it from the Class diagram.and put client type in to different table but not in generalization.
Finally we decided that i do the presentation, first at the sequence diagram for the create new case history. Then explain about the class diagram.So i done the script for my role.
16/10/2010
I have worked on the print report function.and help of my mate, i solved the problem with footer and the report window.We used same height for each item.
We have done the basic template for invoice.There is function called "accountant can refer time sheet to create invoice". I thought that idea is good,but we need another way to explain the function.So it will be changed by Tokio.
we discussed that issue the invoice depend on the client contract.In the invoice page template we use drop down list for the month.So we can use every invoice of the client choosing the month.
I mentioned that View time card function for not only individuals but also system admin.So here we need a assumption that system admin is the employer and he is doing calculating the salaries.
In the presentation i have chosen class diagram and sequence diagram.Because of i need to familiar with these UML diagrams.
I got rough idea about the diagrams.But i think it is not enough for the presentation.So i must prepare the slides and script well.
15/10/2010
Today i started to reveal the report function.and i got a tool called firebug from my mate.i think i can use it for that.And we discussed about the sequence diagram.
And i didn't get the idea about the interface.after discussion i knew that interface means web browser and web server.
At 5.00p.m we got group meeting with supervisor.And we got good feedback from him.And he asked us to do advanced approach.specially asked me about coding progress.So told him i already done login function and now i focus on print report.
He mentioned about next face called "testing" too.ask us to ready for that like preparing test case template.
After finished the minute minute.I done the document for that and asked my mate to checked that.then i have kept in share folder.
And i installed CS5 for web design purpose.
14/10/2010
Today i followed many suggestions which are from the internet research.So i used name spaces like System.Drawing Microsoft.Reporting.winforms.
But still not solved.So i think it is the problem with CSS file.
Anyway i continued to do on print report function.So i need the extra coding for activate print function in the report.So i have used external c# coding there.So it is under construction.
Discussed about the presentation and done coding for the print report function.
13/10/2010
Worked on coding for the login and Researched the print report function.
Then i revealed that also embedded in the ASP.NET and it has report function, export as a excel, PDF and print features.
But i got one issue with the function.Because of when i use the report control that report going through the footer.that's mean report is going behind the footer.
So sill i try to mitigate the problem.
Then done the discussion of use case diagram for actors.
And updated the ER Diagram.
12/10/2010
Specially i researched login function and i found that ASP.NET has embedded login function which has authentication.But it didn't work.Then i refereed the ASP.NET video tutorial.So i changed the authentication from windows to form in web config.
And the function it use cookies.So i realized we don't want the remember me function.anyway i implemented that also.
i drafted other tasks for the search and print report.
Monday, October 4, 2010
Week-05-CRM
11/10/2010
We done our discussion about the ER Diagram.And we got our group meeting with the supervisor.
In there i got the answer for the UserID.It must one UserID for particular Client unless he has different accounts for his business.
And supervisor mentioned the address table may expand to some tables.But i think that is depend on the client requirement.So we gone ask from the client meeting.
We realized from the supervisor that member name must be in full. And logo name must be in front page without in the footer.
After that i done the meeting minutes for the group meeting.Decided our individual tasks of the system implementation.
10/10/2010
Today i got the doubt User-ID must be one or many for the client.So we put that issue in to the meeting agenda for the group meeting.
we done discussion for the Email reminder and created the drafts for activity diagrams and done the templates of email reminder.So we used every possibilities.that's mean in there we can use either existing reminder template or new reminder template.Because we think that way has good usability.
And did works with JavaScript.
09/10/2010
we discussed the activity diagrams and template for the tax case update and delete functions.And about the reminder for the case history.
Besides that i got some issues in ER Diagram.That is whether Time-sheet is independent or dependent from the case history.So i finalized with the members that Time-sheet must be connect to the Client table and we need Client-Taxtype associate table for mention the contract.
And for any reopen of the case must be a amendment which is use new case.
i done java script excise for practice.
08/10/2010
We given our ER Diagram and UML diagram and Meeting minutes to supervisor to check.
and we continued the activity diagram for the manage the client and done relevant templates concurrently.
But i got some doubt about the flow of the activity diagrams specially in the order of search client and create event,So i resolved by discussed with mates.So have activity diagrams for the Client details and Events.
07/10/2010
i got the college at 12.30 p.m. So i done the practice on the JavaScript.After the lunch we got our discussion on the activity diagram of Search function and the Event list using the updated ER Diagram and we finished it at 4.30 p.m.And we discussed the UML class diagram.So there are composition,aggregation and generalization.So we confused about the generalization and composition.Because they are very much similar.So we expect more idea.So we searched the public drive for some resource.
Then we got rough idea about the class diagram about the system.At 18.15 p.m i left from there.
06/10/2010
In the morning we reviewed the things which we gonna ask from the client.and we have got the client meeting .And i got draft about the meeting .
Basically client agreed with our templates and we got some restrictions must be in the system.
I came back to the college then wrote the client meeting minute.
And we got deep discussion about ER Diagram.but also Search function.tomorrow gonna do on UML diagrams .
05/10/2010
i prepared for the presentation.and we done many rehearsal.by the time we got our chance and done the presentation.but it got less figures in the slides.So i struggled to continued my speech.anyway our time was over.
And we done small meeting with the supervisor.And we determined to use mainly ER Diagram
and other UML diagrams.Tomorrow we will do the client meeting in the morning.Hopefully we will solve our issues with the client.
04/10/2010
First-day of the week so we done our own task to make sure it's finished or not.i done my work on slides for presentation.
And we got the meeting with Supervisor. After his comments about presentation.we changed our structure and we explain with using paper prototype and template.Today i started to do the meeting minutes instead of doing Gantt Chart.
We done our discussion about the ER Diagram.And we got our group meeting with the supervisor.
In there i got the answer for the UserID.It must one UserID for particular Client unless he has different accounts for his business.
And supervisor mentioned the address table may expand to some tables.But i think that is depend on the client requirement.So we gone ask from the client meeting.
We realized from the supervisor that member name must be in full. And logo name must be in front page without in the footer.
After that i done the meeting minutes for the group meeting.Decided our individual tasks of the system implementation.
10/10/2010
Today i got the doubt User-ID must be one or many for the client.So we put that issue in to the meeting agenda for the group meeting.
we done discussion for the Email reminder and created the drafts for activity diagrams and done the templates of email reminder.So we used every possibilities.that's mean in there we can use either existing reminder template or new reminder template.Because we think that way has good usability.
And did works with JavaScript.
09/10/2010
we discussed the activity diagrams and template for the tax case update and delete functions.And about the reminder for the case history.
Besides that i got some issues in ER Diagram.That is whether Time-sheet is independent or dependent from the case history.So i finalized with the members that Time-sheet must be connect to the Client table and we need Client-Taxtype associate table for mention the contract.
And for any reopen of the case must be a amendment which is use new case.
i done java script excise for practice.
08/10/2010
We given our ER Diagram and UML diagram and Meeting minutes to supervisor to check.
and we continued the activity diagram for the manage the client and done relevant templates concurrently.
But i got some doubt about the flow of the activity diagrams specially in the order of search client and create event,So i resolved by discussed with mates.So have activity diagrams for the Client details and Events.
07/10/2010
i got the college at 12.30 p.m. So i done the practice on the JavaScript.After the lunch we got our discussion on the activity diagram of Search function and the Event list using the updated ER Diagram and we finished it at 4.30 p.m.And we discussed the UML class diagram.So there are composition,aggregation and generalization.So we confused about the generalization and composition.Because they are very much similar.So we expect more idea.So we searched the public drive for some resource.
Then we got rough idea about the class diagram about the system.At 18.15 p.m i left from there.
06/10/2010
In the morning we reviewed the things which we gonna ask from the client.and we have got the client meeting .And i got draft about the meeting .
Basically client agreed with our templates and we got some restrictions must be in the system.
I came back to the college then wrote the client meeting minute.
And we got deep discussion about ER Diagram.but also Search function.tomorrow gonna do on UML diagrams .
05/10/2010
i prepared for the presentation.and we done many rehearsal.by the time we got our chance and done the presentation.but it got less figures in the slides.So i struggled to continued my speech.anyway our time was over.
And we done small meeting with the supervisor.And we determined to use mainly ER Diagram
and other UML diagrams.Tomorrow we will do the client meeting in the morning.Hopefully we will solve our issues with the client.
04/10/2010
First-day of the week so we done our own task to make sure it's finished or not.i done my work on slides for presentation.
And we got the meeting with Supervisor. After his comments about presentation.we changed our structure and we explain with using paper prototype and template.Today i started to do the meeting minutes instead of doing Gantt Chart.
Monday, September 27, 2010
Week-04-CRM
03/10/2010
Again changed some parts in Use case description.That's mean we concentrated the supervisor advise.And prepared the presentation slides.And done draft for the presentation.We got some issues when we d0 the presentation.So individually we got our feedback from the mates.Then i corrected my faults.i thought i need some more practice for the presentation.
02/10/2010
Today we gathered in library.And discussed about new use case precisely.i did some suggestions for the activities when we discussed
finally we got some use cases for each to do the descriptions.
We done paper prototype templates. So it is easy to understand the scenario straight away. Then we finalized the presentation part for each member.So we got short time to practice on presentation.
01/10/2010
We done our discussion on the each members activity diagrams.and i realized what are alterations for those diagrams and i fixed those.
And i did note the works have to accomplish during the weekend.
30/09/2010
Today i finished the schedule from updating.i done activity diagrams for client detail,tax type,tax-type detail and create invoice.And i finished the descriptions for activity diagrams.
i done coding for login function. But i need what actually client need because of client does not like to give any access to their data. And i done UI design for Forgot password page.
29/09/2010
Discussed the Use cases(actors) with the supervisor.And we have started to do the activity diagram for each use cases of actors.
I done Accountant use cases.it's getting more time to realize the path of the activities.But i realized we need more idea about what are the procedures actually accountant does.And we need to follow same manner from each members.
28/09/2010
Actually we prepared our presentation thoroughly for some times. And done in front of the supervisor.So we got some advise from him and again rehearsed 2 times.
Then we got some confidence.
Finally we done our presentation using new tool called PREZI.And i realized got quite few mistake.from the supervisors we have got some feedback.we responded some of them.
And result of that comment.we changed the use case as dividing by the actor.So i done the use case for the Accountant.
And i wished about new task.because of i like to do many tasks during the project.Otherwise i couldn't brush up my skills.
So i need to download the PREZI and i will try on it.
27/09/2010
In the morning finished weekly journal.
Group meeting with david ad we discussed about client meeting.
Finished the Use case ver1.0.Prepare the slides and script for the presentation.
Finally rehearsed the presentation some times.
Again changed some parts in Use case description.That's mean we concentrated the supervisor advise.And prepared the presentation slides.And done draft for the presentation.We got some issues when we d0 the presentation.So individually we got our feedback from the mates.Then i corrected my faults.i thought i need some more practice for the presentation.
02/10/2010
Today we gathered in library.And discussed about new use case precisely.i did some suggestions for the activities when we discussed
finally we got some use cases for each to do the descriptions.
We done paper prototype templates. So it is easy to understand the scenario straight away. Then we finalized the presentation part for each member.So we got short time to practice on presentation.
01/10/2010
We done our discussion on the each members activity diagrams.and i realized what are alterations for those diagrams and i fixed those.
And i did note the works have to accomplish during the weekend.
30/09/2010
Today i finished the schedule from updating.i done activity diagrams for client detail,tax type,tax-type detail and create invoice.And i finished the descriptions for activity diagrams.
i done coding for login function. But i need what actually client need because of client does not like to give any access to their data. And i done UI design for Forgot password page.
29/09/2010
Discussed the Use cases(actors) with the supervisor.And we have started to do the activity diagram for each use cases of actors.
I done Accountant use cases.it's getting more time to realize the path of the activities.But i realized we need more idea about what are the procedures actually accountant does.And we need to follow same manner from each members.
28/09/2010
Actually we prepared our presentation thoroughly for some times. And done in front of the supervisor.So we got some advise from him and again rehearsed 2 times.
Then we got some confidence.
Finally we done our presentation using new tool called PREZI.And i realized got quite few mistake.from the supervisors we have got some feedback.we responded some of them.
And result of that comment.we changed the use case as dividing by the actor.So i done the use case for the Accountant.
And i wished about new task.because of i like to do many tasks during the project.Otherwise i couldn't brush up my skills.
So i need to download the PREZI and i will try on it.
27/09/2010
In the morning finished weekly journal.
Group meeting with david ad we discussed about client meeting.
Finished the Use case ver1.0.Prepare the slides and script for the presentation.
Finally rehearsed the presentation some times.
Tuesday, September 21, 2010
Week-03-CRM
26/09/2010
Today i done corrections on the Use cases and use case description.
And prepared the questions what we are going to ask from the client.
We have met the client at 3 O'clock.And he mentioned we no need the client side functions which means client can't use the system.System uses only for Mt Roskill Accountants.
25/09/2010
I done use case descriptions.And refreshed the C# coding techniques.
24/09/2010
Today we reviewed the function list and discussed again each ideas.
I done my works on two use cases Client and Contact person,Create Users.
I learned more about PREZI for next presentation.
23/09/2010
We decided to divide the functions of the application among the team.I'm doing Client & contact person,Create Users(Client,Accountant,System Admin).So i have got some additional stuff which are help to get the idea.
And today i have learned Java Script which we can use get more dynamic pages.
About W3.org site.
22/09/2010
Today we started to learn the MVC in ASP.net.So we have referred Asp.net MVC official site.
I have got some idea.But that is not good enough.Anyway MVC concept is more flexible for this CRM application as mentioned in some references.And more focused on Project proposal.But still we haven't meet real client.
21/09/2010
From the morning we prepared the presentation again by doing rehearsals.At afternoon we done our presentation in best as we thought.
Even though i felt that i have some issues like voice frequency,intervals and some phrasing technique to the audience attraction.
By the time we met the supervisor and did show him our presentation and got good feedback.
We heard from him we may able to meet client this week.
I got the idea about PREZI and how can we use it.
Today i gonna refer the Beer-House Website & coding further more.
20/09/2010
Today we gathered in the college.we practiced on the presentation more time.
In the evening we have met Supervisor.We submitted the documents about meeting minutes,project proposal and task trackers.We got some resources for presentation(PREZI).
And during the meeting we realized we need to do the coding in Asp.net.
So today i have stopped using PHP.
Today i done corrections on the Use cases and use case description.
And prepared the questions what we are going to ask from the client.
We have met the client at 3 O'clock.And he mentioned we no need the client side functions which means client can't use the system.System uses only for Mt Roskill Accountants.
25/09/2010
I done use case descriptions.And refreshed the C# coding techniques.
24/09/2010
Today we reviewed the function list and discussed again each ideas.
I done my works on two use cases Client and Contact person,Create Users.
I learned more about PREZI for next presentation.
23/09/2010
We decided to divide the functions of the application among the team.I'm doing Client & contact person,Create Users(Client,Accountant,System Admin).So i have got some additional stuff which are help to get the idea.
And today i have learned Java Script which we can use get more dynamic pages.
About W3.org site.
22/09/2010
Today we started to learn the MVC in ASP.net.So we have referred Asp.net MVC official site.
I have got some idea.But that is not good enough.Anyway MVC concept is more flexible for this CRM application as mentioned in some references.And more focused on Project proposal.But still we haven't meet real client.
21/09/2010
From the morning we prepared the presentation again by doing rehearsals.At afternoon we done our presentation in best as we thought.
Even though i felt that i have some issues like voice frequency,intervals and some phrasing technique to the audience attraction.
By the time we met the supervisor and did show him our presentation and got good feedback.
We heard from him we may able to meet client this week.
I got the idea about PREZI and how can we use it.
Today i gonna refer the Beer-House Website & coding further more.
20/09/2010
Today we gathered in the college.we practiced on the presentation more time.
In the evening we have met Supervisor.We submitted the documents about meeting minutes,project proposal and task trackers.We got some resources for presentation(PREZI).
And during the meeting we realized we need to do the coding in Asp.net.
So today i have stopped using PHP.
Friday, September 17, 2010
Week-02-CRM
19/09/2010
Today we gathered in the Main Campus cafeteria at 10.30 a.m.
We roughly decided that who are doing which part of the coding.And i started to begin the coding for Login and Logout Function.And i refered my coding what i done in my website using PHP.
And i just refered Javascript which is very useful for UI interface.
18/09/2010
Today we have gathered in Main campus library for our discussion.
Mainly i finished my job which is maintain the project schedule,up to this week (21/09/2010).
Specially we got the knowledge of CRM from the Project Analysist (Rieko).So now we have the real idea about the Application well.And we got a technique for PHP as well.
16/09/2010
Have researched about CRM application from the Supervisor's notes.
Created the Project Schedule roughly up to my mind.because we need the discussion to full fill the schedule.
15/09/2010
Created an Email account from the Gmail which is gonna be the Key item for the Application.
Created a Group page which can share the information between us.And sent an Invitation of Group to project involvers who are Team members,Supervisor and the Client.
Have researched CRM application from different Applications.
Today we gathered in the Main Campus cafeteria at 10.30 a.m.
We roughly decided that who are doing which part of the coding.And i started to begin the coding for Login and Logout Function.And i refered my coding what i done in my website using PHP.
And i just refered Javascript which is very useful for UI interface.
18/09/2010
Today we have gathered in Main campus library for our discussion.
Mainly i finished my job which is maintain the project schedule,up to this week (21/09/2010).
Specially we got the knowledge of CRM from the Project Analysist (Rieko).So now we have the real idea about the Application well.And we got a technique for PHP as well.
16/09/2010
Have researched about CRM application from the Supervisor's notes.
Created the Project Schedule roughly up to my mind.because we need the discussion to full fill the schedule.
15/09/2010
Created an Email account from the Gmail which is gonna be the Key item for the Application.
Created a Group page which can share the information between us.And sent an Invitation of Group to project involvers who are Team members,Supervisor and the Client.
Have researched CRM application from different Applications.
Subscribe to:
Posts (Atom)